Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät Benutzerhandbuch
Media and tray
51
2. Menu Overview and Basic Setup
Card stock/ Custom-sized paper
•
In the software application, set the margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
away from the edges of the material.
Preprinted paper
When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
•
Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second about 170 °C (338 °F).
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second about 170 °C (338 °F).
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
affect machine rollers.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.