Zebra 01407-000 Benutzerhandbuch
![Zebra](https://files.manualsbrain.com/attachments/370d33c5dccf4cbdafc4881e363a6131d0861050/common/fit/150/50/e7d75c7848000e06856e522e5c94f23978c9f534cefa079a90db3344b328/brand_logo.jpeg)
61
Programming
Parameter Settings
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
System*
*.
Introduced in firmware version 3.27e
n
n57
v
000-255
The system parameter will control up to eight system components in the printer.
Setting a bit to 1 enables the function and setting it to 0 disables it.
Setting a bit to 1 enables the function and setting it to 0 disables it.
One bit is specified so far:
Bit 0: Clear presenter at reset
NOTE! – Bits whose function is not yet specified must always be set to 1.
<ESC>&P<057><254> Presenter will not be cleared at power ON and reset