Zebra 01407-000 ユーザーズマニュアル
61
Programming
Parameter Settings
03/03/2009
TTP 1020™/TTP 1030™ Technical Manual
P1003643-001
System*
*.
Introduced in firmware version 3.27e
n
n57
v
000-255
The system parameter will control up to eight system components in the printer.
Setting a bit to 1 enables the function and setting it to 0 disables it.
Setting a bit to 1 enables the function and setting it to 0 disables it.
One bit is specified so far:
Bit 0: Clear presenter at reset
NOTE! – Bits whose function is not yet specified must always be set to 1.
<ESC>&P<057><254> Presenter will not be cleared at power ON and reset