Apple emac ati usb2 2005 Servicehandbuch

88 - eMac ATI Graphics/ USB 2.0/2005 Take Apart

 Antenna Board (eMac USB 2.0)

1.

Remove the cable from the black clip, remove one screw, and pry the AirPort antenna 

from the AirPort access door plate.  This is shown with the display/analog assembly 

still attached to the front bezel, in a repair situation it would have to be removed. 

2.

Carefully position the computer so that the CRT faces you. 

Locate the metal antenna bracket at the top of the CRT. Remove the screw on the 

bracket, then pry the antenna cable from the  clip on the side of the CRT.