Apple emac ati usb2 2005 サービスマニュアル
88 - eMac ATI Graphics/ USB 2.0/2005 Take Apart
Antenna Board (eMac USB 2.0)
Procedure
1.
Remove the cable from the black clip, remove one screw, and pry the AirPort antenna
from the AirPort access door plate. This is shown with the display/analog assembly
still attached to the front bezel, in a repair situation it would have to be removed.
2.
Carefully position the computer so that the CRT faces you.
Locate the metal antenna bracket at the top of the CRT. Remove the screw on the
bracket, then pry the antenna cable from the clip on the side of the CRT.