Apricorn EZ Bus DTS Benutzerhandbuch

Seite von 36
The Leader in Personal Storage
0
1.  What is SATA or Serial ATA?
 
 
SATA or Serial ATA (Serial Advanced Technology Attachment) is the natural 
successor for the Parallel ATA interface that is commonly used today.
2.  Why SATA or Serial ATA? 
The following are considered major features of SATA:
w  150MB/s maximum transfer rate (00MB/s and 600MB/s planned for the 
future).
w  Hot-pluggable.
w  Two power saving modes:  partial and slumber
w  Overlapping commands
w  Tagged command queueing
w  Seven wire data cable (compared to the 0 pin connectors used today)
w  Cable length of 1m
3.  Will I be able to still use a SATA drive like the current drives? 
 
The procedure for formatting disks and creating partitions remains the same.
4.  Where can I find out more about SATA? 
 
There is a Serial ATA organization with a website address of www.serialata.
org.
5.  The EZ Bus DTS power LED is on, but the drive is not automatically 
detected by the operating system.
a.  The mass storage device drivers are not installed correctly or there is a 
resource conflict in the system. Use the Windows Add New Hardware Wizard 
to detect the drive, or, if the drive has already been installed, use the Windows 
Update Device Driver Wizard. Be sure that there are no resource conflicts in 
the Windows Device Manager before installing the drive.
b.    Or  you  may  need  to  partition  your  drive.    please  see  the  section  on 
partitioning/formatting your hard drive.
6. FAQ
S