HP 20-700 Benutzerhandbuch

134 Manual Operation

Chapter 4

Caution

Potential equipment damage: You must insert the cartridge 

properly or you will damage the drive. Use only DLT cartridges 

for DLT drives. Make sure the cartridge has a readable VOLSER 

label.

5.  Hold the cartridge so that the VOLSER label is facing you and the write 

protect switch is on the right side of the cartridge, as shown in 

on page 134. 

6.  Insert the cartridge into the drive and push the cartridge into the back of 

the drive until it is firmly seated.

7.  Lower the drive handle.

Figure 38

   

Loading a Cartridge into a DLT Drive

C65137