Manualsbrain.com
  1. Handbücher
  2. Marken
  3. HP
  4. 20-700
  5. Benutzerhandbuch

HP 20-700 Benutzerhandbuch

Download
Seite von 219
98 Operating in Automated Mode
Chapter 4
Drive Status
 on page 98 summarizes drive status messages that might appear on 
the library status screen:
Table 8
Drive Status Messages
Message
Message
Message
Message
Explanation
Explanation
Explanation
Explanation
INIT REQUIRED
You must initialize this drive.
NOT CONNECTED
This drive is not connected to a SCSI bus.
UNKNOWN DRIVE
The library does not recognize the type of drive in 
this location.
NOT COMMUNICATE
This drive is not communicating with the client or 
the drive power is off.
NOT FUNCTIONAL
This drive is not operating properly.
NOT LOADABLE
The library cannot load a cartridge into this drive.
EMPTY
This drive does not have a tape loaded.
CARTRIDGE IN
The drive contains a cartridge, but the cartridge is 
not loaded into the drive.
CLEAN NEEDED
This drive requires cleaning.
CLEAN FAILED
The attempt to clean this drive failed.
LOADING
The library is mounting a cartridge to this drive.
REWOUND
The cartridge in this drive has been rewound.
UNLOADING
The library is dismounting a cartridge from this 
drive.
LOADED
The library has loaded a cartridge into this drive.
REWINDING
The cartridge in this drive is being rewound.
BUSY
This drive is performing a read or write operation.
CLEANING
The drive is being cleaned.