HP dv6 Benutzerhandbuch

Release the wireless antenna cables from the clips built into the base enclosure (5).

Support the display assembly when removing the following screws. Failure to

support the display assembly can result in damage to the display assembly and other

computer components.

Remove the three Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.

Remove the display assembly (2).

Steps 8 through 12 apply to computer models equipped with traditional display

assemblies. Refer to steps 13 through 17 for disassembly information for computer models

equipped with the TouchScreen display assembly.

If it is necessary to replace the display bezel or any of the traditional display assembly internal

components:

a. Remove the Mylar screw covers (1). The screw covers are included in the Display

Miscellaneous Kit, spare part number 603659-001.

b. Remove the two Phillips PM2.5×7.0 screws (2) that secure the display bezel to

the display assembly.

66

Chapter 4   Removal and replacement procedures