HP ml310 Benutzerhandbuch

 

  CAUTION:  To prevent improper cooling and thermal damage, do 

not operate the server unless all bays are populated with either a 
component or a blank.  

1.

  Power down the server ("Powering down the server" on page 

2.

  Remove the bezel ("Unlocking the bezel" on page 

3.

  Remove the access panel ("Removing the access panel" on page 

4.

  Remove the applicable media bay blank. 

5.

  Install the tape drive. 

 

6.

  Secure the USB tape drive cable to the USB tape drive cable connector on 

the system board ("System board components" on page 

7.

  Knock out the applicable bezel blanks. 

8.

  Replace the access panel ("Removing the access panel" on page 

9.

  Install the bezel ("Unlocking the bezel" on page 

10.

 Power up the server ("Powering up the server" on page 

 

1.

  Power down the server ("Powering down the server" on page