HP ml310 User Manual
48
HP ProLiant ML310 Generation 3 Server User Guide
USB tape drive
CAUTION: To prevent improper cooling and thermal damage, do
not operate the server unless all bays are populated with either a
component or a blank.
component or a blank.
1.
Power down the server ("Powering down the server" on page
2.
3.
Remove the access panel ("Removing the access panel" on page
4.
Remove the applicable media bay blank.
5.
Install the tape drive.
6.
Secure the USB tape drive cable to the USB tape drive cable connector on
7.
Knock out the applicable bezel blanks.
8.
Replace the access panel ("Removing the access panel" on page
9.
10.
Power up the server ("Powering up the server" on page
Full-height tape drive
1.
Power down the server ("Powering down the server" on page