HP ml310 Benutzerhandbuch
50
HP ProLiant ML310 Generation 3 Server User Guide
7.
Install the retaining screw.
IMPORTANT: HP recommends installing the tape drive on a
separate SCSI cable to avoid a decrease in performance on other SCSI
devices.
devices.
8.
Connect the data and power cables to the back of the tape drive.
9.
Connect the data cable into a SCSI controller channel ("System board
10.
Remove the applicable bezel blanks from the bezel ("Front panel
11.
12.
Replace the access panel ("Removing the access panel" on page
Diskette drives
A diskette drive can be installed in the server in the following ways:
•
Install a diskette drive in the chassis ("Installing a legacy diskette drive" on
page
•
Install a diskette drive using a USB cable (when using operating systems that
support USB) ("Installing a USB diskette drive" on page