HP pavilion lc3700n Benutzerhandbuch
Setting Up
Setting Up
15
Removing CableCARD
1
Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 27.
(Standby)” on page 27.
2
Check that the CableCARD upgrade screen is not
displayed. If it is displayed, wait until it
disappears.
displayed. If it is displayed, wait until it
disappears.
3
Check that the OPC light on the front of the TV is
NOT red; see “Turning the TV On and Off
(Standby)” on page 27. If it is red, wait for the
OPC light to change or go out.
NOT red; see “Turning the TV On and Off
(Standby)” on page 27. If it is red, wait for the
OPC light to change or go out.
4
Remove the CableCARD.
Disconnecting the cable antenna when
using CableCARD
using CableCARD
1
Turn on the TV; see “Turning the TV On and Off
(Standby)” on page 27.
(Standby)” on page 27.
2
Check that the CableCARD upgrade screen is not
displayed. If it is displayed, wait until it
disappears.
displayed. If it is displayed, wait until it
disappears.
3
Check that the OPC light on the front of the TV is
NOT red. If it is, wait for it to change or go out.
NOT red. If it is, wait for it to change or go out.
4
Disconnect the cable antenna.
For more information about CableCARD, refer to
“Using the CableCARD Menu” on page 62.
“Using the CableCARD Menu” on page 62.
Connecting cable or satellite with a set-top box
Connecting your TV directly to the audio and video
output of your set-top box assures a more vivid picture
and enhances your viewing enjoyment.
output of your set-top box assures a more vivid picture
and enhances your viewing enjoyment.
Optional equipment and all cables are sold separately.
You can connect a digital TV set-top box (air or cable)
and other audiovisual equipment by using:
and other audiovisual equipment by using:
■
Input 1 terminals with either component or
composite video connections
composite video connections
■
Input 2 terminals with either component or
composite video connections
composite video connections
■
Input 4 terminals with HDMI connection
■
Input 5 terminals with DVI connections
1
Connect the set-top box input source cable(s) to
the back of the TV using one of the terminals sets.
the back of the TV using one of the terminals sets.
■
Input 1 (A) or Input 2 (E) using component
connections. (Input 1 shown.)
connections. (Input 1 shown.)
n
If your cable TV company has CableCARD
available, you can also use the CableCARD
to receive HDTV programs. See “Using a
CableCARD” on page 13.
available, you can also use the CableCARD
to receive HDTV programs. See “Using a
CableCARD” on page 13.
c
CAUTION: Unplug power for the TV and all
connected components before connecting
the set-top box.
connected components before connecting
the set-top box.
C
E
A
B
D