Справочник Пользователя для HP pavilion lc3700n

Turn on the TV; see “Turning the TV On and Off 
(Standby)” on page 27. 

Check that the CableCARD upgrade screen is not 
displayed. If it is displayed, wait until it 
disappears.

Check that the OPC light on the front of the TV is 
NOT red; see “Turning the TV On and Off 
(Standby)” on page 27. If it is red, wait for the 
OPC light to change or go out. 

Remove the CableCARD.

Turn on the TV; see “Turning the TV On and Off 
(Standby)” on page 27. 

Check that the CableCARD upgrade screen is not 
displayed. If it is displayed, wait until it 
disappears.

Check that the OPC light on the front of the TV is 
NOT red. If it is, wait for it to change or go out.

Disconnect the cable antenna.

For more information about CableCARD, refer to 
“Using the CableCARD Menu” on page 62.

Connecting your TV directly to the audio and video 
output of your set-top box assures a more vivid picture 
and enhances your viewing enjoyment.

Optional equipment and all cables are sold separately.

You can connect a digital TV set-top box (air or cable) 
and other audiovisual equipment by using:

■

Input 1 terminals with either component or 
composite video connections 

■

Input 2 terminals with either component or 
composite video connections

■

Input 4 terminals with HDMI connection

■

Input 5 terminals with DVI connections

Connect the set-top box input source cable(s) to 
the back of the TV using one of the terminals sets.

■

Input 1 (A) or Input 2 (E) using component 
connections. (Input 1 shown.)

n

c