HP proliant dl580 Benutzerhandbuch
Removal and replacement procedures 28
To replace the component, reverse the removal procedure.
Removing the PCI-X Hot Plug basket
1.
Power down the server (on page
2.
Extend or remove the server from the rack ("
3.
Remove the access panel ("
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
expansion slots have either an expansion slot cover or an expansion board installed.
4.
Remove the expansion board from the slot, if installed ("
5.
Remove the PCI-X Hot Plug basket ("
To replace the component, reverse the removal procedure.
Removing a non-hot-plug expansion board
1.
Power down the server (on page
2.
Extend or remove the server from the rack ("
3.
Remove the access panel ("
4.
Disconnect any required internal or external cables from the expansion board.
5.
Open the PCI latch.
6.
Unlock the retaining clip.