Canon PIXMA Pro9000 Anleitung Für Quick Setup

Troubleshooting

Eight flashes

Ink absorber almost 
full

The printer has a built-in ink absorber for the ink used during print head cleaning, 
for example.
Eight flashes indicates that the ink absorber is nearly full.
Press the RESUME/CANCEL button to cancel the error so you can continue printing. 
Before the ink absorber becomes completely full, contact the Customer Care 
Center. (You will need to replace a particular part of the printer.)

Canon recommends that you call for service as soon as this error 
occurs. Once the ink absorber becomes completely full, printing 
cannot be performed until the ink absorber is replaced.

Nine flashes

A specified period 
of time has elapsed 
without receiving a 
response from the 
digital camera/The 
digital camera or 
digital video 
camcorder 
connected is not 
compatible with 
this printer

Disconnect the camera cable and reconnect it.

Depending on the model or brand of your PictBridge compliant 
device, you may have to select a print mode before connecting the 
device. 
You may also have to turn on the device or select Play mode manually 
after connecting the device to the printer. 
Perform necessary operations according to the instruction manual 
supplied with your device.

If the error is still unresolved, there is a possibility that you are using a digital 
camera or digital video camcorder that is not supported by this printer. PictBridge-
compatible digital camera or digital video camcorder can be connected to your 
printer for Direct Printing.

Ten flashes

The Front Tray is not 
set to its correct 
position/The Front 
Tray was moved 
during printing

When printing from the Auto Sheet Feeder, return the Front Tray to its normal 
printing position. Ensure that paper is loaded in the Auto Sheet Feeder and then 
press the RESUME/CANCEL button on the printer to resume printing.
Refer to 

“Returning the Front Tray to Its Normal Printing Position” 

on page 14 for 

details about how to return the Front Tray to its normal printing position.
If you have moved the Front Tray during printing, return the Front Tray to the 
correct position, then press the RESUME/CANCEL button on the printer and try 
printing again.
Do not move the Front Tray during printing.