Sony ipela snc-rz25p Benutzerhandbuch

Pre

par

at

ion

Assigning the IP Address to the Camera

10

To specify the IP address manually:
Select Use the following IP address, and type the 
IP address, Subnet mask and Default gateway in the 
relevant boxes.

Set the DNS server address.

To obtain the DNS server addresses 
automatically:
Select Obtain DNS server address automatically.

To specify the DNS server addresses manually:
Select Use the following DNS server address, and 
type the Primary DNS server address and 
Secondary DNS server address in the relevant 
boxes.

The Third DNS server address and Fourth DNS 
server address are invalid for this camera.

Set the HTTP port No.

Normally select 80 for the HTTP port No.  To use 
another port number, select the text box and type a 
port number between 1024 and 65535.

Type the Administrator name and Administrator 
password.

The default settings of both items are “admin.”

You cannot change the Administrator name and 
Administrator password in this step.  To change 
these items, See “Setting the User — User setting 
Menu” on page 44.

Confirm that all items are correctly set, then click 
OK.

If “Setting OK” is displayed, the IP address is 
correctly assigned.

To access the camera directly, double-click the 
camera name on the list.

The factory setting of the camera network is as 
follows.
IP address:

192.168.0.100

Subnet mask: 255.0.0.0

Wireless LAN setting
Type:

Adhoc

SSID:

snc-rz25

Channel: 11 ch
WEP:

Nothing

The welcome page of the network camera SNC-
RZ25N or SNC-RZ25P is displayed.

If the IP address is not set correctly, the welcome page 
does not appear after step 12. In this case, try to set the 
IP address again.