Sony ipela snc-rz25p Benutzerhandbuch

Pre

par

at

ion

Assigning the IP Address to the Camera

9

The Preparation section explains what the administrator 
has to prepare for monitoring the images after 
installation and connection of the camera.

To connect the camera to a network, you need to assign 
a new IP address to the camera when you install the 
camera for the first time.
You can assign an IP address in two ways:
• Using the setup program stored in the supplied CD-

ROM (see page 9)

• Using the ARP (Address Resolution Protocol) 

commands (see page 75)

This section explains how to assign an IP address to the 
camera using the supplied setup program and how to 
configure the network.

Before starting, connect the camera to a local network, 
referring to “Connections” in the supplied Installation 
Manual.
Consult the administrator of the network about the 
assigned IP address.

Insert the supplied CD-ROM disc into your CD-
ROM drive.
After a short time a window will open displaying 
the files on the CD-ROM.

Click the Setup icon of IP Setup Program.
The “File Download” dialog opens.

Click Open.

If you click “Save this program to disk” on the “File 
Download” dialog, you cannot install correctly. 
Delete the downloaded file, and click Setup icon 
again.

Install the IP Setup Program to your computer 
following the wizard displayed.
If the Software License Agreement is displayed, 
read it carefully and accept the agreement to 
continue the installation.

Start the IP Setup Program.
The program detects the SNC-RZ25N or SNC-
RZ25P cameras connected to the local network and 
lists them on the Network tab window.

Click on the camera to which you want to assign a 
new IP address in the list.

The network settings for the selected camera are 
displayed.

Set the IP address.

To obtain the IP address automatically from a 
DHCP server:
Select Obtain an IP address automatically.

The IP address, Subnet mask and Default gateway 
are assigned automatically.