Sony ipela snc-rz25p Benutzerhandbuch
Ot
her
her
s
Using the Custom Homepage Installer
73
Creating and transmitting a panorama
image
image
1
Click the Make button to start shooting.
A panorama image will be created in about two
minutes.
A panorama image will be created in about two
minutes.
Note
Do not make settings of the camera or move the
camera during shooting.
camera during shooting.
2
Select the view angle for a panorama image on
Angle Setting.
To limit the pan/tilt range of the camera to the
selected view angle, check the Lock check box.
Angle Setting.
To limit the pan/tilt range of the camera to the
selected view angle, check the Lock check box.
3
Click the Send button to transmit the panorama
image to the camera.
The panorama image is saved in the camera.
image to the camera.
The panorama image is saved in the camera.
You can use the saved panorama image when you
control panning and tilting from the main viewer.
control panning and tilting from the main viewer.
Saving a custom image to the camera
You can save a custom image to the camera in spite of
the panorama image shot by the camera.
Prepare the image to conform to the following
requirements:
• File format: JPEG or Bitmap
• Image size: 320 × 90 pixels (horizontal/vertical)
the panorama image shot by the camera.
Prepare the image to conform to the following
requirements:
• File format: JPEG or Bitmap
• Image size: 320 × 90 pixels (horizontal/vertical)
The camera does not support use of images that do not
conform to the above conditions.
conform to the above conditions.
1
Click the File open button.
The File dialog opens.
The File dialog opens.
2
Select the image you have prepared.
3
Select the view angle of the image to be created on
Angle setting.
To limit the pan/tilt range of the camera to the
selected view angle, check the Lock check box.
Angle setting.
To limit the pan/tilt range of the camera to the
selected view angle, check the Lock check box.
4
Click the Send button to transmit the prepared
image to the camera.
The image is saved in the camera.
image to the camera.
The image is saved in the camera.
You can use the saved image when you control panning
and tilting from the main viewer.
and tilting from the main viewer.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with “SNC panorama creator”. When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
the image taken when you were going to create a
panorama image with “SNC panorama creator”. When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Using the Custom
Homepage Installer
Homepage Installer
You can store the homepage that you have created in the
camera and watch it.
camera and watch it.
Notes on creating the homepage
When you creating the homepage, note the following
points.
• The file name should be typed up to 24 characters
When you creating the homepage, note the following
points.
• The file name should be typed up to 24 characters
including the extension.
• The file size of the homepage should be 2.4 MB or
less.
• To watch the created homepage, set the Default URL
in the System setting menu.
Uploading the Custom Homepage
Installer to the Camera
Installer to the Camera
1
After a short time a window will open displaying
the files on the CD-ROM.
the files on the CD-ROM.
2
Click the Setup icon of Custom Homepage
Installer.
The “File Download” dialog opens.
Installer.
The “File Download” dialog opens.
3
Click Open.
The installer starts and notes are displayed.
The installer starts and notes are displayed.
Note
If you click “Save this program to disk” on the “File
Download” dialog, the
CustomHomepageInstaller.exe file will be saved on
the computer. Double-click the saved file to start it.
Download” dialog, the
CustomHomepageInstaller.exe file will be saved on
the computer. Double-click the saved file to start it.