Sony pdw-f30 Benutzerhandbuch

42

Playback

  

Ch
apt

er 3  Rec

o

rdi
ng and

 P

la

y

bac

k

To carry out playback again, move back to the desired clip 
using the PREV button, jog dial or shuttle dial.

To set shot marks
While playing back a disc, you can set essence marks such 
as SHOT MARK1 and SHOT MARK2 in desired frames.
To set a SHOT MARK1 or SHOT MARK2, hold down the 
M/MARK1 or m/MARK2 button and press the SET 
button.

To erase or change essence marks, use the supplied 
PDZ-1 Proxy Browsing Software.

In jog mode, you can control the speed of playback by the 
speed of turning the jog dial. The playback speed range is 
–1 to +2 times normal speed.
To carry out playback in jog mode, proceed as follows.

Press the JOG button, turning it on.

Turn the jog dial in the desired direction, at the speed 
corresponding to the desired playback speed.

Playback in jog mode starts.

To stop playback in jog mode, stop turning the jog dial.

Normally, the unit enters jog mode as soon as you turn 
the jog dial. If you want it to enter jog mode only when 
you press the JOG button, set OPERATIONAL 
FUNCTION >SEARCH ENABLE in the setup menu 
to “VIA SEARCH KEY”.

In shuttle mode, you can control the speed of playback by 
the angular position of the shuttle dial. The range of 
playback speed is ±20 times normal speed.
To carry out playback in shuttle mode, proceed as follows.

Press the SHUTTLE button, turning it on.

Turn the shuttle dial to the desired angle 
corresponding to the desired playback speed.

Playback in shuttle mode starts.

To stop playback in shuttle mode, return the shuttle 
dial to the center position, or press the STOP button.

Normally, the unit enters shuttle mode as soon as you 
turn the shuttle dial. 
If you want it to enter shuttle mode only when you 
press the SHUTTLE button, set OPERATIONAL 
FUNCTION >SEARCH ENABLE in the setup menu 
to “VIA SEARCH KEY”.

To alternate between normal-speed playback and 
shuttle mode playback
Set the shuttle dial to the position corresponding to the 
desired shuttle playback speed, then switch between 
normal-speed playback and shuttle playback by pressing 
the PLAY and SHUTTLE buttons alternately.

In variable-speed mode, you can control the speed of 
playback in the range of –1 to +2 times normal speed.
To carry out playback in variable-speed mode, proceed as 
follows.

Press the VAR button, turning it on.

Turn the shuttle dial to the desired angle 
corresponding to the desired playback speed.