Sony pdw-f30 Benutzerhandbuch

43

Playback

  Chapt

er

 3

  Rec

o

rd

ing and

 P

la

y

bac

k

Playback in variable-speed mode starts.

To stop playback in variable-speed mode, return the 
shuttle dial to the center position, or press the STOP 
button.

To alternate between normal-speed playback and 
variable-speed mode playback
Set the shuttle dial to the position corresponding to the 
desired variable playback speed, then switch between 
normal-speed playback and variable-speed mode playback 
by pressing the PLAY and VAR buttons alternately.

You can display thumbnail images (index pictures) of all 
clips on the disc, and use them to cue up a desired clip.

With the SUB CLIP button off, press the THUMBNAIL 
button, turning it on.
A list appears showing thumbnails of 12 clips on the disc, 
including the clip being currently played back. (In the 
following description, this is referred to as the “thumbnail 
screen”.)

a) When a title has been assigned to a clip (see page 54), the title is enclosed 

in double quotation marks, for example “TITLE00001”.

b) A mark is shown to indicate that the thumbnail (index picture) is not the 

first frame of the clip. (See “To change a thumbnail image (index 
picture)” on page 44.)

To return to the original screen
Press the THUMBNAIL button, turning it off.

In any of the following screens, you can press the 
THUMBNAIL button to return to the original screen.

Do one of the following to select the thumbnail of the 
clip you want to cue up.

• Press the arrow buttons.
• Turn the jog or shuttle dial.
• Press the PREV or NEXT button: Move to the 

previous or next thumbnail.

• Press the TOP (SHIFT + PREV) or END (SHIFT + 

NEXT) button: Move to the first or last thumbnail.

• Holding down the SHIFT button, press the 

M/

MARK1 or 

m/MARK2 button: Display the previous 

or next page.

Press the SET button or the PLAY button.

If you press the SET button, a still image appears 
showing the first frame of the selected clip.
If you press the PLAY button, playback starts from the 
first frame of the selected clip.

The factory default setting for the clip thumbnail is 
such that the first frame of the clip is used as the 
thumbnail but you can change this setting so that any 
desired frame is used as the clip thumbnail (see “To 
change a thumbnail image (index picture)” (page 
44)). However, clip list playback always starts from 
the first frame, regardless of the thumbnail.

With the thumbnail list displayed, proceed as follows.

Press the CLIP MENU (SHIFT + SUB CLIP) button 
or the MENU button to display the clip menu.

Name of currently 
selected clip

 a)

Thumbnail (index picture) of 
currently selected clip

 b)

Sixth clip is selected from 
a total of 34 clips.

Clip information (recording date and time, initial timecode, 
total length, and so on)

Recording date and 
time of selected clip

Total length of selected clip