Sony pdw-v1 Benutzerhandbuch

Chap

Men

7-4 Maintenance Menu

7-4 Maintenance Menu

7-4-1 Items in the Maintenance Menu

The maintenance menu includes the following items.
In the table, the underscored items are the factory default
settings.

For details about DRIVE MAINTENANCE, ADJUST,
CHECK, BATTERY CONFIG, SERVICE SUPPORT, and
OTHERS, refer to the Maintenance Manual.

For details of how to make settings, see “To change
network settings” (page 82).

AUDIO CONFIG: items relating to audio control

Item

Setting

DATA LENGTH

When “IMX50,” “IMX40,” or “IMX30” is selected in setup menu item 031, this selects the
audio quantization bit count and number of recording channels.
16

× 8: 16 bits × 8 channels

× 4: 24 bits × 4 channels

Note

When item 031 is set to “DVCAM,” the setting is automatically fixed at 16 bits

× 4 channels.

NON-AUDIO INPUT

Select whether to handle digital audio signals as non-audio signals during recording.

Sub-item

tr1/tr2

audio: Handle as audio signals.
data: Handle as non-audio signals.

tr3/tr4

tr5/tr6

tr7/tr8

NETWORK CONFIG: items relating to network settings

Item

Setting

DHCP

Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.

IP ADDRESS PRESET

Set IP address.
192.168.001.010

Note

When DHCP is set to “ENABLE,” it is not possible to set the IP address.

SUBNET MASK PRESET

Set the subnet mask.
255.255.255.000

Note

When DHCP is set to “ENABLE,” it is not possible to set the subnet mask.

DEFAULT GATEWAY PRESET

Set the default gateway.
000.000.000.000

Note

When DHCP is set to “ENABLE,” it is not possible to set the default gateway.

LINK SPEED

Set the communications speed.
AUTO, 10Mbps, 100Mbps

DUPLEX

Set the communications method.
AUTO
Full Duplex: Full duplex
Half Duplex: Half duplex