Sony STR-DG1100 Benutzerhandbuch
108
GB
Tuning radio stations
1
Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO,” then turn
TUNING to select stations.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO,” then turn
TUNING to select stations.
Selecting a frequency directly
(Direct tuning)
(Direct tuning)
1
After selecting the FM or AM band,
press D.TUNING.
press D.TUNING.
2
Press the numeric buttons to enter the
frequencies, then press
frequencies, then press
to enter.
1
Tune in the station that you
want to preset.
want to preset.
For details on the operation, refer to
“Tuning radio stations.”
“Tuning radio stations.”
2
Press MEMORY.
“MEMORY” appears on the display for a
few seconds. Perform steps 3 and 4 before
the display changes.
few seconds. Perform steps 3 and 4 before
the display changes.
3
Press PRESET + or PRESET –
to select a preset number.
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
available. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
4
Press ENTER.
The station is stored as the selected preset
number. If “MEMORY” disappears
number. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
another station.
Selecting a preset station
1
Press TUNER repeatedly to select the
FM or AM band.
FM or AM band.
2
Press PRESET+ or PRESET –
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET,”
then use TUNING to select the preset
stations you want.
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET,”
then use TUNING to select the preset
stations you want.
For details on XM/SIRIUS Radio service,
refer to “Listening to satellite radio” (page 78)
in “Tuner Operations.”
refer to “Listening to satellite radio” (page 78)
in “Tuner Operations.”
Checking the Satellite Tuner ID
1
Press SHIFT, then press XM to select
“XM RADIO,” or press SIRIUS to select
“SIRIUS.”
You can also use INPUT SELECTOR on
the receiver.
“XM RADIO,” or press SIRIUS to select
“SIRIUS.”
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING – to select
channel 0.
You can also press TUNING MODE on the
receiver to select “AUTO,” then turn
TUNING to select channel 0.
channel 0.
You can also press TUNING MODE on the
receiver to select “AUTO,” then turn
TUNING to select channel 0.
3
Check the XM ID or SIRIUS ID on the
display and write it in the space
provided here.
display and write it in the space
provided here.
XM ID:__________________________
SIRIUS ID:_______________________
SIRIUS ID:_______________________
Presetting radio stations
Listening to satellite tuner