Denon DVD-3800BDCI Benutzerhandbuch

23

You can enjoy stereo phonic virtual space through your existing  
2-channel stereo system.

2) Use [U / V] to select “1” (Natural effect), “2” (Emphasized 

Use this function to shut down unused circuitry to achieve high 
quality analog sound.
1) Press [PURE DIRECT] repeatedly to select your desired pure 

direct mode.
• Each time you press [PURE DIRECT], the pure direct mode 

changes as “Normal”

A “Video Off” A “Display Off” A       

“All Off”  

A “Normal”. The modes will be displayed on the 

front panel display.

BD audio mode is to choose between two ways; you could output 
the secondary and interactive audio accompanied by the primary 
audio or you could output the primary audio only. Depending on 
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus, 
Dolby TrueHD, or DTS-HD output changes between Multi LPCM 
and bitstream.

1) In stop mode with BD inserted, press [MODE].
2) Use [U / V] to select desired setting.

䡵 “Mix Audio Output”

If it is available, BD video's secondary and interactive audio will be 
output with the primary audio.

• The secondary audio is the audio for the sub picture 

(Director's comment etc.) and the interactive audio is the 
audio for the interactive application (Button click sounds 
etc.).

䡵 “HD Audio Output”

Only the primary audio will be output. Set this mode in order to 
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or 
DTS-HD sound of BD through HDMI connection.

• You can also set “BD Audio Mode” from the setup menu. 

Refer to page 32.

OFF

ON

ON / STANDBY

HDMI

RESOLUTION

VIDEO NOISE
REDUCTION

BLU-RAY DISC PLAYER 

DVD-3800BDCI

[U / V / Y / Z]

< >: Buttons on the main unit
 [  ]  : Buttons on the remote control

Buttons on the main unit and remote control

• Select virtual surround “Off” or lower the volume if the sound 

is distorted.

• This function cannot be used during dialog speed (refer to page 17).
• For the virtual surround, audio signal will always be 2-channel LPCM.

: Normal playback mode (pure direct mode 

is off).

: Video signal will not be output.

: Circuitry for front panel display and 

indicators will be shut down.

: Video signal will not be output and 

circuitry for front panel display and 
indicators will be shut down.

• If you turn off the unit or put this unit to standby mode, the 

pure direct mode will go back to “Normal”.

Off

• In “Mix Audio Output” mode, even you set “HDMI 

Multi(Normal)” in “HDMI Audio Out” setting, multi LPCM will 
be output from HDMI OUT for BD audio. Refer to page 11.

• In “Mix Audio Output” mode with HDMI audio being output, 

2-channel downmix LPCM will be output from DIGITAL OUT 
for BD audio.

• In “Mix Audio Output” mode with “HDMI Audio Out” set to 

“Audio Mute” and  “Digital Out” set to “Bitstream”, DTS,      
DTS-HD and LPCM will be output as Dolby Digital for BD 
audio. Refer to page 12.

• In “Mix Audio Output” mode, from 7.1ch AUDIO OUT, Dolby 

Digital Plus, Dolby TrueHD and DTS-HD will be output as 
multi LPCM decoded from its corresponding core stream.

E5E00UD_EN.book  Page 23  Friday, January 18, 2008  6:59 PM