Denon DVD-3800BDCI Benutzerhandbuch

32

• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with 

 

mark.

• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is 

effective only for HDMI RGB output.

• If you set “HDMI Video Resolution” to “1080p24” and set “I/P Direct” to “On”, and the contents of 

the BD is not compatible for 1080p24 frame, 1080p60 frame will be output.

• An individual picture on the screen is called as “Frame” , which consists of two separate images 

called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their 
data characteristics.

• If the picture is not output properly to the display device because of the “HDMI Video 

Resolution” or “Component Output” setting, press and hold B on the front panel for more than 
5 seconds. Both settings will be reset to the default automatically.

• For “TV Aspect”, 4:3 squeeze function is not available during BD playback.
• If HDMI is connected, for video resolution for the component output, you can only select video 

resolution that currently output from HDMI OUT or 480i. 

• If the video resolution for the component output and HDMI video resolution does not match, the 

video resolution for the component output will be switched to 480i. COMPONENT VIDEO OUT 
jacks may not output any signals depend on the disc material.

• If you set “I/P Direct” to “On”, there is no output from VIDEO OUT, S VIDEO OUT and COMPONENT 

VIDEO OUT jack.

• COMPONENT VIDEO OUT jacks may not output any signals when you set the “HDMI Select” to 

“RGB” or “HDMI Deep Color” to “Auto”.

• If you play back copy-protected DVD video, 480p signal will be output from the COMPONENT 

VIDEO OUT jacks, when “Component Output” is set to “480i”, “720p” or “1080i”.

• If connected display device does not support 1080p24 frame or “I/P Direct” is set to “Off”, 

“1080p24” in “HDMI Video Resolution” will be displayed in gray and you can not select the item.

䡵

• For how to select the setting items and options, refer to “Custom” on page 29.

TV Active Area
Sets the horizontal display area for 
interlace (480i) output. 

Normal:
Select this if the image is not stable with connecting to 
professional-use display.
Full*: 
Select this for connecting to commonly-marketed 
display.

Wall Paper
Sets the picture to be displayed on 
the screen for stop mode or audio 
playback mode.

Picture*
Blue
Black
Gray

For BD, select whether to output 
the secondary and interactive 
audio with primary audio if it is 
available or only the primary 
audio. Refer to “Setting the BD 
Audio Mode” on page 23. 

Mix Audio Output*:
Output the secondary and interactive audio with 
primary audio if it is available.

HD Audio Output:
Output only the primary audio. Set this mode in order to 
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, 
DTS or DTS-HD sound of BD through HDMI connection.

Sets the audio format for the audio 
output from the HDMI OUT.

HDMI Multi(Normal)*:
The multi-channel audio signals are output from the 
HDMI OUT with a bitstream or LPCM.

HDMI Multi(LPCM):
The multi-channel audio signals are output from the 
HDMI OUT with a LPCM.
• Refer to pages 34-35 for setting options.

HDMI 2ch:
The audio signals are output from the HDMI OUT with a 
downmixed to 2ch LPCM.

Audio Mute:
Mutes the HDMI audio signal, and set the signal format 
of the DIGITAL OUT.
• Refer to the “Digital Out Setting” on page 33 for setting 

options.

E5E00UD_EN.book  Page 32  Friday, January 18, 2008  6:59 PM