Denon s-32 s-52 ost-f1297 Servicehandbuch
6) Either turn "Multi Jog" or press "SKIP REV/SKIP FWD" after pressing
"SOURCE" to select "SETUP" icon then press "ENTER".
7) Turn "Multi Jog" to select "Firmware Update" then press "ENTER".
8) Turn "Multi Jog" to select "Update Start" then press "ENTER".
9) The firmware will start updating.
"SOURCE" to select "SETUP" icon then press "ENTER".
7) Turn "Multi Jog" to select "Firmware Update" then press "ENTER".
8) Turn "Multi Jog" to select "Update Start" then press "ENTER".
9) The firmware will start updating.
10) During the updating, the LCD Display indicates the procedure of update the
firmware.
11) Time necessary for update: approximately 30 min.
Caution: The update time might change depending on the situation of the DPMS
server and the speed of the Internet environment of the customer house.
12) After upgrading, the LCD Display indicates below.
firmware.
11) Time necessary for update: approximately 30 min.
Caution: The update time might change depending on the situation of the DPMS
server and the speed of the Internet environment of the customer house.
12) After upgrading, the LCD Display indicates below.
13) The updating of Firmware has ended when the blank display continues for 10
seconds or more. Caution: If you pull out the AC cable from AC strip before 10
seconds, the unit will be broken. Please wait certainly 10 seconds or more
14) Please pull out the AC cable from the AC strip. (Turn the Power Supply of
the unit off.)
15) Finish.
When the unit has updated to the latest firmware, the FL Display indicates
following.
seconds or more. Caution: If you pull out the AC cable from AC strip before 10
seconds, the unit will be broken. Please wait certainly 10 seconds or more
14) Please pull out the AC cable from the AC strip. (Turn the Power Supply of
the unit off.)
15) Finish.
When the unit has updated to the latest firmware, the FL Display indicates
following.
Note: If the display reads as shown below, check the settings and network
environment, then update again. The problem is not in the Internet connection if
the Internet radio can be received correctly.
environment, then update again. The problem is not in the Internet connection if
the Internet radio can be received correctly.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.