Panasonic cq-va7800n Benutzerhandbuch

19

18

Cautions:
¡

For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.

¡

Avoid physical shock on the display. 

Caution: Do not interfere with the movement of the dis-
play. Do not change the position of the unit forcibly.

Cautions: 
¡

Do not place any object on the display unit, or subject it
to undue force.

¡

Do not move the display forcibly.

¡

The monitor movable range may be limited by a type of
car, a position where the display is mounted, etc.

Press and hold [TILT] on the display unit for more than
2 seconds.

Press []] or [[] to adjust.
The setup is the same way as the one from MENU.
Refer to “User Settings” for details. (

a

page 28) 

Fold Down: Press [TILT] on the display unit.
Raise: Press [TILT] again on the display unit.

Note: Even when the unit is power off, you can fold down the
display temporarily.

2

Notes:
¡

Vertical angle (TILT) data are saved in the memory, so when
the display unit is drawn out next, it is automatically set at
the angle adjusted before.

¡

After adjusting its angle, also adjust the brightness to make
it easy for you to watch. (

a

page 38)

¡

The car model and installation condition may impose some
restrictions on the adjustment of the display’s angle.

1

Press [

(OPEN/CLOSE).

Press [

(OPEN/CLOSE) again.

Notes:
¡

When the display unit is opened or closed, a loud
beep sounds three times.

¡

If the unit stops halfway, press [

again and draw it all the way in.

¡

Opening/closing the display can also be done when
the power is off.

Turn your car’s ignition key to ACC or ON position.
ON: Press [MODE] (POWER) on the display unit.

Press [PWR] or [MODE] on the remote control.

OFF: Press [MODE] (POWER) again for more than 2 

seconds on the display unit.
Press [PWR] again or [MODE] again for more than 2
seconds on the remote control.

Warning: 
¡

¡

[VOL}] [VOL{]

[}] [{] (VOLUME)

Press [MODE] to change the mode.

*

1 

VTR1/VTR2 can be skipped when no external devices
are connected. (

a

page 32)

*

2 

Selectable only when the CD Changer or Video CD
Changer are connected.

[VOL}]: Increase
[VOL{]: Decrease
Setting Range : 0 to 40

Note: The volume level can be set independently for each source.
(For radio, one volume setting for AM, one volume setting for all FMs)

MUTE ON: Press [MUTE].
MUTE OFF: Press [MUTE] again.

When listening at low or medium volume, enhance bass and treble tones.
LOUD ON: Press and hold [MUTE] (LOUD) for more than 2 seconds.
LOUD OFF: Press and hold [MUTE] (LOUD) for more than 2 seconds

again.

Note: The setup is the same way as the one from MENU.
Refer to “Sound Settings” for details. (

a

page 36) 

VTR 1 *

1

TV

(

a

page 20)

(

a

page 22)

(

a

page 22)

(

a

page 24)

(

a

page 26)

CH-C (CD Changer/Video CD

Changer Control)*

2

VTR 2 *

1

AM/FM (Radio)

[PWR]
(Power)

[] ] [[ ]
(Adjust)

[] ] [[ ]
(Adjust)