Panasonic cq-va7800n Benutzerhandbuch

23

22

Press [MODE] to change to VTR1 or VTR2 mode.

Mode display

Note: Select the same mode as the terminal that is connected to the device.

Select the same mode (VTR1 or VTR2) as the terminal that is connected
to a DVD Player or Camcorder (Video Input Terminal 1 (VTR 1) or Video
Input Terminal 2 (VTR 2)).

Select the same mode (VTR1 or VTR2) as the terminal that is connected
to a car navigation system (Video Input Terminal 1 (VTR 1) or Video Input
Terminal 2 (VTR 2)).

Note: Video Input Terminal 1 (VTR 1) and Video Input Terminal 2 (VTR
2) are not used for the Panasonic car navigation system (available in the
future).

Example: 

: DVD Player

: NON-Panasonic Car Navigation

System

VTR1

VTR2

(e.g. CX-DVP292,

option)

Caution: When you connect external devices to
Video Input Terminal 1 (VTR 1)/Video Input Terminal
2 (VTR 2), be sure to connect the side brake 
connection lead. (

a

page 59)

Mode display

“Sub-LCD Display Change” (

a

page 44)

Preparation: Specify the correct terminal that is connect-
ed to the car navigation system in the “INPUT/OUTPUT”
operation on the “User Settings”. (

a

page 30)

Press [NAVI](NAVIGATION) to change to the car naviga-
tion mode.
Press [NAVI](NAVIGATION) again to cancel.

This function allows a parallel operation. While you follow
the Navigation Screen, you can listen to radio, CD Changer,
Video CD Changer, TV and VTR1/VTR2 mode in back-
ground.

Notes:
¡

If the navigation mode is ON, only the audio signal is
switched while the video signal remains as it is.

¡

The mode can be changed even when the display unit is in
the retracted position.

¡

The volume of the voice guidance from the car navigation
system can be set. (

a

page 30)

Connecting with Panasonic Car Navigation System
(available in the future)...
Connect a Panasonic car navigation system to RGB
connector.