Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. cy-vm7203n
  5. Benutzerhandbuch

Panasonic cy-vm7203n Benutzerhandbuch

Download
Seite von 22
30
English
CY-VM7203N
31
English
CY-VM7203N
Installation 
(continued)
29
30
Installation Procedures (When Using Mounting Collar 
) 
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car 
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer. 
Use the supplied Spacer 
 if mounting hole of your car is shaped like below. 
To Remove the Unit 
 Push the right and left clamp plates outward, one at 
a time, and pull the unit toward yourself. 
Connecting the Parking Brake (Side Brake) Connection Lead
The parking brake (side brake) switch position varies with the car 
model. For details on the exact location of the parking brake (side brake) 
switch in your car, contact your dealer.
Parking Brake (Side Brake) Connection 
Lead
(Bright green)
When the parking brake (side brake) lever 
is engaged, the unit is grounded by the 
chassis.
Parking Brake (Side Brake) 
Connection Lead
(Bright green)
Parking brake (side brake) 
switch
Brake light
Battery
Car chassis
Come up to this point.
Power source side lead
Hand brake
Foot brake
 Attach a Clip Connector 
 to the end of the parking  
brake (side brake) connection lead. 
 The Clip Connector 
 is connected to the power 
source side lead of the parking brake (side brake) 
lever.
 Clip Connector
      Caution
 For safety, be sure to ask your nearest professional 
installer to do this connection. 
Select mounting screws according to the hole positions and hole shape of the bracket.
 Round Head Screw (5 mm
6 mm)  
2 pieces
 
Recycle the Round Head Screws that fi xed the transportation brackets for 
two more positions. 
 Round Head Screw (4 mm
3 mm)  
 4 
pieces 
 Flat-Head Screw (5 mm
6 mm)   
4 pieces
Mounting Hole 
of a Bracket (in 
section) 
 Round Head Screw 
 (5 
mm
6 mm) 
 Spacer
 Double-Faced Adhesive Tape
Existing Bracket (L) (Bracket originally attached to the car)
Bracket 
 To remove Trim Plate , pull it from right side to left side. 
 Round Head Screw (5 mm
6 mm) 
 Spacer
 Double-Faced 
Adhesive Tape
Existing Bracket (R)
Push here to 
remove the 
clamp plates.
When using these 
mounting holes
 After removing the right and left clamp plates, pull 
the unit with both hands till it comes out.