Panasonic cy-vm7203n Benutzerhandbuch

32

33

32

31

 This unit is designed for use in a car having a 12 V 

negative ground battery system. 

 To prevent damage to the unit, be sure to follow the 

connection diagram. 

 Do not insert the power connector into the unit until 

the wiring is completed. 

 Be sure to insulate any exposed wires to prevent 

short circuiting with the car chassis. Bundle all 
cables, and prevent cable terminals from touching 
any metal parts. 

 Note that if your car has a driving computer or a 

navigation computer, disconnecting the cable from 
the battery may clear the memory. 

 Run the cords avoiding the spots where the 

temperature can be extremely high. 

Note: 
 Strip about 5 mm of the lead ends for connection. 
 Be sure to fully plug in the connectors. Secure them 

with clamps and tapes. 

 All other installation methods require the use of 

dedicated metal fi ttings. Consult with a qualifi ed 
servicing engineer or your dealer if other methods are 
required. 

Reverse Lead 
(Violet/white stripe)
When connecting the Rear View Camera, use the reverse 
lead.

Parking Brake (Side Brake) Connection Lead 
(Bright green)
Be sure to wire the parking brake (side brake) for safety and 
preventing accidents. 

Video input 2 (VIDEO 2-IN) cord 
(Yellow)

 Power Connector 

ACC Power Lead  
(Red)
To ACC power, 

12 V DC. 

Battery Lead  
(Yellow)
To the car battery, continuous 

12 V DC. 

Ground Lead  
(Black) 
To a clean, bare metallic part of the car chassis. 

Remote-out Cord   
(Black) 
To the remote input terminal of the devices.

Video (Yellow) 
To the video input connector of the Rear Monitor (option). 

L (White)

R (Red)

To the audio input connector of the car audio 
player/receiver (option)

Video 
(Yellow)

R (Red)

L (White)

VIDEO 1-IN 
(Yellow)