Panasonic kx-tg7102fx Benutzerhandbuch
Base Unit Settings
20
Call options
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
1
{j
/OK} i “Base Unit Setup” i
{>}
2
“Call Options” i {>}
3
“Call Restrict” i {>}
4
Enter the base unit PIN (default:
“0000”).
“0000”).
5
Set which handsets will be restricted by
pressing the desired handset number.
pressing the desired handset number.
L
All the registered handset numbers
will be displayed.
will be displayed.
L
Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
restriction is turned on for the
corresponding handset.
L
To turn call restriction off for a handset,
press the number again. The number
will stop flashing.
press the number again. The number
will stop flashing.
6
{j
/OK}
7
Select a memory location. i {>}
8
Enter the phone number or area code to
be restricted (8 digits max.). i
{j
be restricted (8 digits max.). i
{j
/OK} i {ih}
L
To erase a restricted number, press
{
{
C/T}.
Changing the unit’s region
setting/Resetting the base unit
1
setting/Resetting the base unit
1
{j
/OK} i “Base Unit Setup” i
{>}
2
“Other Options” i {>}
3
“Country” i {>}
4
Select the desired country. i {>}
“EG”=countries except Czech and
Slovakia
“CZ”=Czech
“SK”=Slovakia
“EG”=countries except Czech and
Slovakia
“CZ”=Czech
“SK”=Slovakia
5
“Yes” i {j/OK} i {ih}
Note:
L
The following items will be deleted or reset
to their default settings:
– Settings listed on page 19, 25, 30
– All SMS messages
– Caller list
to their default settings:
– Settings listed on page 19, 25, 30
– All SMS messages
– Caller list
L
The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting
– Date and time
– Repeater mode
– Recordings, including your greeting
message and caller messages (KX-
TG7120 only)
TG7120 only)
L
If you select the desired country in step 4,
the following default settings will be
changed for the selected country’s default
settings:
– Message centre 1 and 2 (page 25)
– Recall time (page 19)
– Language (page 16)
– SMS on/off (page 25)
– Language used for answering system
the following default settings will be
changed for the selected country’s default
settings:
– Message centre 1 and 2 (page 25)
– Recall time (page 19)
– Language (page 16)
– SMS on/off (page 25)
– Language used for answering system
announcements (KX-TG7120 only)
L
After changing the unit’s region
setting/resetting the base unit, w will flash
on the handset momentarily. This is
normal. The handset can be used once w
stops flashing.
setting/resetting the base unit, w will flash
on the handset momentarily. This is
normal. The handset can be used once w
stops flashing.
TG7100-7120FX(e-e).book Page 20 Thursday, August 10, 2006 10:32 AM