Panasonic kx-tg7220fx Benutzerhandbuch
Base Unit Settings
19
Base unit settings
To customise the base unit using the handset:
1
{j
/OK}
2
Press {^} or {V} to select “Base Unit Setup”. i {>}
3
Press {^} or {V} to select the desired item in the base unit settings menu. i
{>}
{>}
4
Press {^} or {V} to select the desired item in the sub-menu. i {>}
5
Press {^} or {V} to select the desired setting then press {>}.
L
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press {ih}.
Note:
L
L
The current item or setting is indicated by > on the display.
*1 KX-TG7220
*2 Change the recall time, if necessary, depending on the requirements of your
*2 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
*3 When using the unit in Czech/Slovakia, select “100 msec.” as the recall time. If
you change the unit’s region setting/reset the base unit, the recall time will be reset
to the default setting. In this case, select “100 msec.” again.
to the default setting. In this case, select “100 msec.” again.
*4 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*5 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
Details (default setting)
Ringer Volume
—
For base unit (Medium)
Call Options
Dial Mode
(“Tone”): page 12
Recall/Flash
Recall time
)
Other Options
Base Unit PIN
Change base unit PIN (“0000”).
– Enter the current 4-digit base unit
PIN.
– Enter the new 4-digit base unit
PIN. i {>} i {ih}
Repeater Mode
(“Off”): page 34
Country
Change the unit’s region setting
(“Other”): page 20
(“Other”): page 20
TG7200-7220FX(e-e).book Page 19 Friday, June 29, 2007 10:24 AM