Panasonic kx-ts620exb Benutzerhandbuch
36
Storing Names and
Numbers in the Direct Dial
memory
Numbers in the Direct Dial
memory
You can store up to 3 names and phone
numbers in the memory.
numbers in the memory.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
1
Press .
2
Scroll to “Save M1,M2,M3 ?”
by pressing {
by pressing {
4
}
or {
3
}
and
press {OK}
(Yes key).
3
Enter a name, up to 15
characters with the dialling
buttons {0} to {9}, {
characters with the dialling
buttons {0} to {9}, {
£} and {#}
(p. 32).
• To move the cursor, press {
:
}
or
{
9
}
.
• If a name is not required, go to step
4.
4
Press {OK} (Next key).
5
Enter a phone number up to 32
digits.
digits.
• If you enter a wrong number, press
{
}
and enter the correct number.
• To erase all of the digits, press and
hold { }.
• If you want to change the storing
name, press {
3
}
to reach the
desired display.
6
Press one of the Direct Dial
button ({M1}, {M2} or {M3})
(Save key).
(Example: {M1} is pressed.)
button ({M1}, {M2} or {M3})
(Save key).
(Example: {M1} is pressed.)
• A long beep sounds.
• The entered name and phone
• The entered name and phone
number are displayed.
• After a few seconds, the display will
return to step 2. To exit the
programming mode, press
programming mode, press
or
wait for 60 seconds.
• When using the Dial Lock (p. 42) or
Call Restriction feature (p. 43), you
cannot store a phone number in the
Direct Dial memory ({M1}, {M2} or
{
cannot store a phone number in the
Direct Dial memory ({M1}, {M2} or
{
M3}).
If the Direct Dial button
selected manually is occupied,
the display will be shown as
below.
To overwrite, press {OK}
(Yes key).
selected manually is occupied,
the display will be shown as
below.
To overwrite, press {OK}
(Yes key).
To select the other empty Direct
Dial memory, press {
Dial memory, press {
3
}
(No key)
and press an empty Direct Dial
button ({M1}, {M2} or {M3}).
button ({M1}, {M2} or {M3}).
• A long beep sounds.
• The display will return to step 2. To
• The display will return to step 2. To
exit the programming mode, press
or wait for 60 seconds.
• To continue storing other items,
repeat from step 2.
{
?
}
M1,M2,M3=Save
123456789
{ ? }
M1 is occupied
[
]=No [OK]=Yes
Overwrite ?
{ ? }
Direct Dial (M1, M2, M3)
TS620EX.book Page 36 Monday, July 17, 2006 5:18 PM