Panasonic kx-ts620exb Benutzerhandbuch
Direct Dial (M1, M2, M3)
37
To erase a stored number
1
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
button ({M1}, {M2} or {M3}).
2
Press { }.
• To stop erasing, press {
3
}
(
No
key).
3
Press {OK} (Yes key).
• A long beep sounds, the
information is erased, then
“Memory Empty” is displayed.
“Memory Empty” is displayed.
• To exit the programming mode, press
or wait for 60 seconds.
• When using the Dial Lock (p. 42) or Call
Restriction feature (p. 43), you cannot
erase a phone number in the Direct Dial
memory ({M1}, {M2} or {M3}).
erase a phone number in the Direct Dial
memory ({M1}, {M2} or {M3}).
• If a pause is required for dialling, press
{
}
where needed. If required, you can
also store {R} in a phone number.
Pressing {
Pressing {
}
or {R} counts as one digit
(p. 38, 40).
Dialling a Stored Number
from the Direct Dial
memory
from the Direct Dial
memory
1
Lift the handset or press {s/W}.
2
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
button ({M1}, {M2} or {M3}).
• The stored number is displayed
and dialled.
OR
1
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
button ({M1}, {M2} or {M3}).
• The stored number is displayed.
2
Lift the handset or press {s/W}.
• When you press the Direct Dial buttons
continuously, confirm that the first dialling
out have complete, then press the next
button.
out have complete, then press the next
button.
• You can dial numbers stored in the Direct
Dial memory ({M1}, {M2} or {M3}) even if
the Dial Lock (p. 42) or Call Restriction
feature (p. 43) is set.
the Dial Lock (p. 42) or Call Restriction
feature (p. 43) is set.
{ ? }
TS620EX.book Page 37 Monday, July 17, 2006 5:18 PM