Panasonic nv-gs50en Benutzerhandbuch
Before Use
-80-
Setting Date and Time
Since the internal clock of the Movie
Camera has a slight imprecision, make
sure to check the time before recording.
Camera has a slight imprecision, make
sure to check the time before recording.
1
Set [CAMERA FUNCTIONS] >>
[OTHER FUNCTIONS1] >>
[CLOCK SET] >> [YES].
Or set [VCR FUNCTIONS] or
[CARD FUNCTIONS] >>
[OTHER FUNCTIONS] >>
[CLOCK SET] >> [YES].
[OTHER FUNCTIONS1] >>
[CLOCK SET] >> [YES].
Or set [VCR FUNCTIONS] or
[CARD FUNCTIONS] >>
[OTHER FUNCTIONS] >>
[CLOCK SET] >> [YES].
2
Press the [PUSH] Dial
(38)
to select
[YEAR], [MONTH], [DAY], [HOUR] or
[MIN.] and turn to set it to a desired
value.
≥Year will cycle in the order shown
[MIN.] and turn to set it to a desired
value.
≥Year will cycle in the order shown
below.
2000, 2001, ..., 2089, 2000, ...
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
(46)
to
finish setting the date and time.
≥The clock operation starts from
≥The clock operation starts from
[00] second.
≥The Menu will disappear when the
[MENU] Button is pressed again.
≥If the built-in battery is weak, the [
0]
Indication flashes. In this case, charge
the built-in battery.
the built-in battery.
≥The clock employs the 24-hour system.
Internal Lithium Battery
Recharge
Recharge
The internal lithium battery sustains the
operation of the clock. When the [
operation of the clock. When the [
0]
Indication flashes, the internal lithium
battery is near exhaustion.
battery is near exhaustion.
M E N U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(46)
(38)
CLOCK SET
PRESS MENU TO RETURN
YEAR
2003
MONTH 10
DAY
0
8
HOUR 14
MIN. 30
1
Connect the AC Adaptor to the
Movie Camera with the power
turned off and then connect to the
AC Mains socket.
Movie Camera with the power
turned off and then connect to the
AC Mains socket.
≥After charging for 4 hours, the
built-in lithium battery can power the
clock for approximately 3 months.
clock for approximately 3 months.
LP Mode
A desired recording speed can be
selected with [REC SPEED] on the
[RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording
time becomes 1.5 times longer than
that of SP Mode.
Although the image quality does not
decrease with the LP Mode recording,
mosaic-pattern noise may appear on a
playback image, or some normal
functions may be restricted.
≥The contents that are recorded in LP
selected with [REC SPEED] on the
[RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording
time becomes 1.5 times longer than
that of SP Mode.
Although the image quality does not
decrease with the LP Mode recording,
mosaic-pattern noise may appear on a
playback image, or some normal
functions may be restricted.
≥The contents that are recorded in LP
Mode are not completely compatible
with other equipment.
with other equipment.
≥Audio dubbing is not possible with LP
Mode. (
-100-
)
Audio Recording Mode
The sound quality of the recorded sound
can be selected with [AUDIO REC] on
the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible
with “16 bit 48 kHz 2 track” Mode. With
the “12 bit 32 kHz 4 track” Mode, the
original sound can be recorded on
2 tracks in stereo, while the other
2 tracks can be used for Audio Dubbing.
can be selected with [AUDIO REC] on
the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible
with “16 bit 48 kHz 2 track” Mode. With
the “12 bit 32 kHz 4 track” Mode, the
original sound can be recorded on
2 tracks in stereo, while the other
2 tracks can be used for Audio Dubbing.
VQT0C47.book 80 ページ ２００３年１月２０日 月曜日 午後４時４９分