Panasonic nv-gs50en Benutzerhandbuch

Seite von 140
Camera Mode
-82-
ª To View the Recorded Scene 
while the Recording Is Paused 
(Camera Search)
The recorded scene can be viewed by 
keep pressing the [SEARCH
j] Button 
(7)
 or [SEARCH
i] Button 
(9)
 in the 
Recording Pause Mode.
≥When the [SEARCHj] Button is 
pressed, images are played back in the 
reverse direction.
≥When the [SEARCHi] Button is 
pressed, images are played back in the 
forward direction.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch 
(43)
 to 
[OFF].
≥For other notes concerning this item, 
see 
-120-
.
ª To Add a Sound while 
Recording
With the supplied Free Style Remote 
Controller with Mic connected to the 
[REMOTE] Socket 
(24)
, you can add a 
narration while recording is in progress.
While the [TALK] Button 
(84)
 is pressed, 
the [
] Indication is displayed and the 
sound is recorded from [MIC] 
(80)
.
≥While the [TALK] Button is pressed, the 
built-in microphone does not operate.
ª Recording Yourself
By opening the LCD Monitor and rotating 
it frontward (to the lens side), you can let 
the subject in front of the Movie Camera 
SEARCH
SEARCH
BACK
LIGHT
(7)
               
(9)
REC
(80)
(84)
monitor the shot while recording is in 
progress.
≥When the LCD Monitor is opened, the 
Viewfinder is disabled automatically. 
However, when the LCD Monitor is 
rotated frontward, the image is also 
shown in the Viewfinder.
≥If you prefer to have the image on the 
LCD Monitor to look like an image in a 
mirror, set [SELF REC] on the 
[OTHER FUNCTIONS1] Sub-Menu to 
[MIRROR]. Images are recorded 
normally and no left and right reversal 
occurs.
≥If [MIRROR] is used during 
self-recording, only the basic 
indications, such as the Recording 
Indication [
] (Red) or [
¥], Recording 
Pause Indication [
] (Cyan) or [
¥;] 
and Remaining Battery Power 
Indication [
x], are displayed.
≥If a general Warning/Alarm Indication 
[
°] appears, return the LCD Monitor 
to the original position in order to check 
the specific content of the 
Warning/Alarm Indication.
Quick Start
By pressing the [QUICK START] Button 
(41)
, and the Movie Camera will be ready 
for recording in approximately 
1.3 seconds after the Movie Camera is 
turned on.
1
Press the [QUICK START] Button 
(41)
.
≥The Quick Start Recording Lamp 
(42)
 lights up.
START
QUICK
(41)
(42)
VQT0C47.book  82 ページ  2003年1月20日 月曜日 午後4時49分