Panasonic nv-mx500 Benutzerhandbuch
Others
-45-
Picture Adjustment
≥Settings once performed will remain valid so long as the
≥Settings once performed will remain valid so long as the
[AUTO/MANUAL/AE LOCK] Switch is set to [MANUAL]. It
is therefore recommended that the Picture Adjustment be
checked prior to recording at the [MANUAL] setting.
is therefore recommended that the Picture Adjustment be
checked prior to recording at the [MANUAL] setting.
≥During Picture Adjustment, holding down the [PUSH] Dial
for about 2 seconds returns the bar indication to the centre
of the monitor.
of the monitor.
ª Using The Auto Pop-up Flash
≥A slight shock accompanies when the Video Flash pops up.
≥The available range of the Video Flash is approximately
≥The available range of the Video Flash is approximately
1 to 2.5 metres in a dark places. Picture will appear dark
when they are recorded by using the Video Flash at
distances greater than 2.5 metres.
when they are recorded by using the Video Flash at
distances greater than 2.5 metres.
≥Object of recording may appear dark if Video Flash is
lighted in front of white background.
≥Using the Video Flash fixes the shutter speed of 1/750 s or
faster to 1/500.
≥Using the Video Flash is not possible during the
Continuous Photoshot recording, the Colour Night View
Mode and the MPEG4 Recording.
Mode and the MPEG4 Recording.
≥The picture may become out of focus in a dark place. In this
case, adjust the focus manually.
≥Tele Conversion Lens (VW-LT4314ME; optional) or Wide
Conversion Lens (VW-LW4307ME; optional) can block
flash light and may cause vignetting effect.
flash light and may cause vignetting effect.
≥Do not use the Video Flash with the ND Filter of the Filter
Kit (VW-LF43WE; optional).
≥Even if the [RED EYE REDUCTION] is set to [ON], you still
may get red eyes phenomenon depending on the recording
condition.
condition.
≥The Movie Camera, even when its Video Flash has been
turned off, automatically determines whether the flash light
is necessary or not by detecting the ambient brightness. (If
it determines that the flash light is necessary, the [
is necessary or not by detecting the ambient brightness. (If
it determines that the flash light is necessary, the [
]
Indication is displayed in yellow.)
≥When the [
ß], [ßi], [ßj], [ß
A
], [
ß
A
i] or [
ß
A
j] Indication is
displayed, the Video Flash can be lighted. (When flashing,
the Video Flash is charging.) When the [
the Video Flash is charging.) When the [
] Indication is
displayed, the Video Flash will not be lighted.
≥When the [P-IN-P] Button is pressed or Title is created,
Video Flash is also lighted.
≥When the [FLASH] on the [RECORDING SETUP]
Sub-Menu is set to [AUTO] and the Shutter Speed, Iris or
Gain is adjusted, the Indication ([
Gain is adjusted, the Indication ([
ß], [ßi], etc.) may
disappear and the Video Flash may not be lighted.
Using the Video Flash VW-FLH3E (optional)
≥Using the Video Flash outdoors or with backlight or other
≥Using the Video Flash outdoors or with backlight or other
bright conditions may result in white blotches (colour
blotches) on the pictures. In this case, either adjust the iris
manually or use the Backlight Compensation Function.
blotches) on the pictures. In this case, either adjust the iris
manually or use the Backlight Compensation Function.
≥Using the Video Flash VW-FLH3E (optional) enables you to
record still pictures farther than 2.5 metres in a dark place.
The available range is approximately 1 to 4 metres.
The available range is approximately 1 to 4 metres.
≥The Video Flash VW-FLH3E (optional) and the Built-in
Video Flash cannot be used simultaneously.
≥When using the Video Flash VW-FLH3E (optional), the
shutter speed, the iris and the white balance become fixed.
ª Digital Effect Functions
≥It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or
[TRACER] of [EFFECT1] together with the digital modes of
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible. (
-19-
)
≥Setting the Cinema Mode cancels the Picture-in-Picture
Mode and the Multi-Picture Mode.
In the following cases, using the [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON] (
[DIGITAL EFFECT] Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON] (
-16-
)
≥When the [REC MODE] is set to [FRAME] (
-16-
)
≥When the Colour Night View Mode is set (
-18-
)
In the following cases, using the Digital Effect Function
is not possible.
≥Card Mode
≥Title In
It is as follows when [GAINUP] is selected.
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [
is not possible.
≥Card Mode
≥Title In
It is as follows when [GAINUP] is selected.
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [
5], the Portrait Mode [7] and Low
Light Mode [
4] are cancelled.
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
Picture-in-Picture Mode
≥If the [OFF/ON/MODE] Switch is operated, the smaller
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
Picture-in-Picture Mode
≥If the [OFF/ON/MODE] Switch is operated, the smaller
picture disappears.
≥Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while self-recording Mirror
Multi-Picture Mode
≥If the [MULTI] Button is pressed while self-recording Mirror
Mode (
-15-
) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
recorded from the upper left corner as usual.
≥Multi-Picture Mode cannot be used in digital still picture
mode.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be cut off
≥The top and bottom of the Multi pictures will be cut off
slightly.
ª Playing Back
Repeat Playback
If you continue to press the [
If you continue to press the [
1] Button for 5 seconds or
longer, the Movie Camera switches to Repeat Playback
Mode, and the [R
Mode, and the [R
!] Indication appears. (To cancel Repeat
Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Listening to Playback Sound through Headphones
If you want to use the headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Socket (
Listening to Playback Sound through Headphones
If you want to use the headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Socket (
-6-
) on the Movie Camera. In this
case, no sound (including a warning sound and shutter
sound) will be reproduced through the built-in speaker of the
Movie Camera.
≥When connecting the headphones with remote controller to
sound) will be reproduced through the built-in speaker of the
Movie Camera.
≥When connecting the headphones with remote controller to
the [PHONES] Socket, the Movie Camera may cause the
mis-operation.
mis-operation.
Choosing Sound during Playback
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu,
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].
ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still
≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
Photoshot Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
1 minute.
B5-B.book 45 ページ ２００２年８月６日 火曜日 午前１１時３３分