Panasonic nv-mx500 Benutzerhandbuch
Others
-50-
Battery
≥Extremely high temperatures or low temperatures will
≥Extremely high temperatures or low temperatures will
shorten the life of the Battery.
≥If the Battery is kept in smoky or dusty places, the terminal
may rust and cause malfunctions.
≥Do not allow the Battery terminals to come in contact
with metal objects (such as necklaces, hairpins, etc.).
This can result in a short circuit or heat generation
and, if you touch the Battery in this condition, you may
be badly burned.
This can result in a short circuit or heat generation
and, if you touch the Battery in this condition, you may
be badly burned.
≥Store the Battery in a completely discharged state. To store
the Battery for a long period of time, we recommend you
charge it once every year and store it again after you
completely use up the charged capacity.
charge it once every year and store it again after you
completely use up the charged capacity.
Cassette
≥Before storing it, rewind the tape to the beginning. If the
≥Before storing it, rewind the tape to the beginning. If the
Cassette is left for more than 6 months with the tape
stopped midway, the tape sags (although it depends on the
storage condition). Be sure to rewind to the beginning.
stopped midway, the tape sags (although it depends on the
storage condition). Be sure to rewind to the beginning.
≥Store the Cassette in its case. Dust, direct sunlight
(ultraviolet rays), or humidity may damage the tape. Dust
contains hard mineral particles, and dusty Cassettes
damage the heads of the Movie Camera and other
components. Develop a habit of returning the Cassette
back to its case.
contains hard mineral particles, and dusty Cassettes
damage the heads of the Movie Camera and other
components. Develop a habit of returning the Cassette
back to its case.
≥Once every half year, wind the tape to the end and then
rewind it to the beginning. If the Cassette is left for 1 year or
longer without winding or rewinding, temperature and
humidity changes may cause the Cassette to deform due to
swelling, shrinking, and so forth. The wound tape may stick
to itself.
longer without winding or rewinding, temperature and
humidity changes may cause the Cassette to deform due to
swelling, shrinking, and so forth. The wound tape may stick
to itself.
≥Do not place a Cassette near highly magnetic substances
or equipment.
≥The surface of tape is covered with extremely minute
magnetic particles, upon which signals are recorded.
Magnetic necklaces, toys, etc., have magnetic force that is
stronger than you may normally expect, and they may
erase the contents of a recording or may cause noise in
images and sounds.
Magnetic necklaces, toys, etc., have magnetic force that is
stronger than you may normally expect, and they may
erase the contents of a recording or may cause noise in
images and sounds.
Card
≥When the Card is being read, do not remove the Card, turn
≥When the Card is being read, do not remove the Card, turn
off the power, or subject it to vibration or impact.
≥Do not leave the Card in places where there is high
temperature or direct sunlight, or where electromagnetic
waves or static electricity are easily generated.
waves or static electricity are easily generated.
≥Do not bend or drop the Card. The Card or the recorded
content may be damaged.
≥After use, be sure to remove the Card from the Movie
Camera.
≥After usage, store the supplied SD Memory Card in the
enclosed bag.
≥Do not touch the terminals on the back of the Card with
your fingers. Do not allow dirt, dust or water to enter it.
ª LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥In a place with drastic temperature changes, condensation
≥In a place with drastic temperature changes, condensation
may form on the LCD Monitor. Wipe it with soft dry cloth.
≥If your Movie Camera is extremely cold when you turn its
power on, the image on the LCD Monitor is slightly darker
than usual at first. However, as the internal temperature
increases, it goes back to the normal brightness.
increases, it goes back to the normal brightness.
Viewfinder
≥Do not direct the Viewfinder or Lens to the sun. Internal
≥Do not direct the Viewfinder or Lens to the sun. Internal
components may be seriously damaged.
≥When the Movie Camera is used with a large capacity
Battery (CGA-D54S; optional) attached to it, it is not
practical to look in the Viewfinder from behind the Battery.
practical to look in the Viewfinder from behind the Battery.
≥To clean the inside of the Viewfinder, keep pressing 1 and
hold the Eyecup
2 and pull it out.
Lens Hood
≥Do not attach other conversion lenses in front of the Lens
≥Do not attach other conversion lenses in front of the Lens
Hood; there is no mount to be used for the attachment.
≥When attaching the Filter Kit (VW-LF43WE; optional),
attach it on the inside of the Lens Hood without removing
the Lens Hood.
the Lens Hood.
≥When you wish to attach the Tele Conversion Lens
(VW-LT3414ME; optional) or the Wide Conversion Lens
(VW-LW3407ME; optional), first of all, turn the Lens Hood
counterclockwise. When you attach the Lens Hood back,
insert
(VW-LW3407ME; optional), first of all, turn the Lens Hood
counterclockwise. When you attach the Lens Hood back,
insert
1 into the slot 2 and turn it clockwise.
≥If you push the [W/T] Lever toward [W] during recording
with the filter and conversion lens attached together to the
Movie Camera, 4 corners of the image may become dark
(vignetting). For details, please refer to the operating
instructions of your accessories.
Movie Camera, 4 corners of the image may become dark
(vignetting). For details, please refer to the operating
instructions of your accessories.
≥Be sure to keep the Lens Hood attached to the Movie
Camera so as to shut out unnecessary light.
Before Requesting Repair (Problems and
Solutions)
Solutions)
Power
1: The Movie Camera power cannot be turned on.
• Is the power source connected correctly? (
1: The Movie Camera power cannot be turned on.
• Is the power source connected correctly? (
-8-
)
2: The Movie Camera power is turned off automatically.
• If you leave the Movie Camera in Recording Pause Mode
• If you leave the Movie Camera in Recording Pause Mode
for more than 6 minutes, the power is turned off
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
200,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
employed to produce the LCD Monitor
screen featuring a total of approximately
200,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.
Extremely high precision technology is
employed to produce the Viewfinder screen
featuring a total of approximately 113,000
pixels. The result is more than 99.99%
effective pixels with a mere 0.01% of the
pixels inactive or always lit. However, this is
not a malfunction and does not affect the
recorded picture.
employed to produce the Viewfinder screen
featuring a total of approximately 113,000
pixels. The result is more than 99.99%
effective pixels with a mere 0.01% of the
pixels inactive or always lit. However, this is
not a malfunction and does not affect the
recorded picture.
2
1
1
2
B5-B.book 50 ページ ２００２年８月６日 火曜日 午前１１時３３分