Panasonic sa-ht822v Benutzerhandbuch

RQT7708

Refer to the remote control illustration on page 40.

➜ page 40)

3 4] to select the “OPTION” 

3 4] to select the item and 

2 1] to change the setting 

➜ below).

To exit the settings screen
Press [MENU] until the screen disappears.

Panasonic video cassette recorders use the same remote control 
system so they may respond unintentionally to a command from this 
remote control. Change the code on this unit and its remote control 
(the two must match) if you place another Panasonic video cassette 
recorder close together.
≥Use “1”, the factory preset, under normal circumstances. 

3 4] to select the “REMOTE 

2 1] to select the code (1 or 2) 

The remote control code on the unit has been set.

The remote control code on the remote control has been set.

The following is displayed when you use a remote control with the 
different code.

The unit’s remote control code

Change its code to match the unit’s (

➜ step 3).

s/r:

2 1

≥

≥

≥

≥

≥

≥

s/r:

2 1

≥

≥

3

4

3

4

≥

Settings (Underlined items are the factory preset.)

➜ page 43, On-screen display)

ON:

Messages appear on the television for about five seconds 
after you perform operations.

OFF:

Messages do not appear.

TAPE SELECT
Set the length of tape you are using so the unit can show the correct 
remaining time.

T120:

T30, T60, T90, T120 tapes

T160:

T140, T160 tapes

T180:

T180 tapes

ON:

The screen shows a blue background when you play 
unrecorded portions.

OFF

➜ page 38)

ON:

Jet Navigator data automatically registered.

OFF:

Data not registered.

DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 38 to delete data on a single tape.

NO
YES:

Then press [ENTER] when you want to delete all the Jet 
navigator data.

➜ page 32)

Set the speed for JET SEARCH when playing EP and VP tapes.

a27

a35

Select 

a27 if the picture is poor at a35.

➜ page 43, Changing audio)

Set the MTS (Multi-channel Television Sound Stereo) reception 
type.

MAIN: To receive stereo broadcasts.
SAP:

To receive SAP when being broadcast.

MONO: To receive monaural broadcasts (e.g., when reception is 

poor).

1

2

DISPLAY
Set the brightness of the unit's display when the unit is in standby 
mode.

BRIGHT: The display is bright all the time.
DIM:

The display dims when the unit is in standby mode.

OFF:

The display turns off when the unit is in standby mode.

≥When Demo function is on, the display does not turn off even if 

“OFF” is selected. Select “DEMO OFF” to reduce power 
consumption (

➜ page 16).

7708en.book  42 ページ  ２００４年２月１４日　土曜日　午後３時２４分