Panasonic sa-ht822v Manual De Usuario
42
RQT7708
Changing settings
Refer to the remote control illustration on page 40.
1
While VHS MENU is displayed (
➜ page 40)
Press [
3 4] to select the “OPTION”
and press [ENTER].
2
Press [
3 4] to select the item and
press [
2 1] to change the setting
(
➜ below).
To exit the settings screen
Press [MENU] until the screen disappears.
Press [MENU] until the screen disappears.
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥Use “1”, the factory preset, under normal circumstances.
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥Use “1”, the factory preset, under normal circumstances.
1
While OPTION menu is displayed
Press [
3 4] to select the “REMOTE
CONTROL”.
2
Press [
2 1] to select the code (1 or 2)
and press [MENU].
The remote control code on the unit has been set.
3
While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
The remote control code on the remote control has been set.
The following is displayed when you use a remote control with the
different code.
different code.
The unit’s remote control code
Change its code to match the unit’s (
➜ step 3).
OPTION
OPTION 1/2
OSD ON
OFF
TAPE SELECT
T120
T120
T160
T180
BLUE BACK
ON
OFF
JET NAVIGATOR
ON
OFF
DELETE NAVIDATA
NO
YES
JET SEARCH
x27
x35
SELECT :
s/r:
END :MENU
2 1
≥
≥
≥
≥
≥
≥
OPTION 2/2
MTS MAIN
SAP
MONO
REMOTE CONTROL
1
2
DISPLAY
BRIGHT
BRIGHT
DIM
OFF
SELECT :
s/r:
END :MENU
2 1
≥
≥
3
4
3
4
≥
REMOTE CONTROL
Items
Settings (Underlined items are the factory preset.)
OSD (
➜ page 43, On-screen display)
ON:
Messages appear on the television for about five seconds
after you perform operations.
after you perform operations.
OFF:
Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
Set the length of tape you are using so the unit can show the correct
remaining time.
T120:
T30, T60, T90, T120 tapes
T160:
T140, T160 tapes
T180:
T180 tapes
BLUE BACK
ON:
The screen shows a blue background when you play
unrecorded portions.
unrecorded portions.
OFF
JET NAVIGATOR (
➜ page 38)
ON:
Jet Navigator data automatically registered.
OFF:
Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 38 to delete data on a single tape.
Delete all the Navigation data registered in the unit.
See page 38 to delete data on a single tape.
NO
YES:
YES:
Then press [ENTER] when you want to delete all the Jet
navigator data.
navigator data.
JET SEARCH (
➜ page 32)
Set the speed for JET SEARCH when playing EP and VP tapes.
a27
a35
Select
a27 if the picture is poor at a35.
MTS (
➜ page 43, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception
type.
type.
MAIN: To receive stereo broadcasts.
SAP:
SAP:
To receive SAP when being broadcast.
MONO: To receive monaural broadcasts (e.g., when reception is
poor).
REMOTE CONTROL
1
2
DISPLAY
Set the brightness of the unit's display when the unit is in standby
mode.
Set the brightness of the unit's display when the unit is in standby
mode.
BRIGHT: The display is bright all the time.
DIM:
DIM:
The display dims when the unit is in standby mode.
OFF:
The display turns off when the unit is in standby mode.
≥When Demo function is on, the display does not turn off even if
“OFF” is selected. Select “DEMO OFF” to reduce power
consumption (
consumption (
➜ page 16).
VHS
7708en.book 42 ページ 2004年2月14日 土曜日 午後3時24分