FIC a985 Servicehandbuch
Maintenance & Disassembly
5-10
FIC A985 Service Manual
To install or replace the CPU, follow the steps below:
1. Before removing the CPU module, you need first to disassemble keyboard and heat sink
1. Before removing the CPU module, you need first to disassemble keyboard and heat sink
plate.
2. Using a flat screwdriver, turn the socket lock counter-clockwise direction to unlock CPU
from the socket.
Socket locker
Figure 5-10 CPU Assembly
5.5.7 Removing the LCD Panel
The procedure for removing the LCD Panel is as follows:
1. Follow the steps above in removing the keyboard cover.
2. You will find the LCD panel connector attached to the system unit using two screws and
one cable Remove the screws of the cover and cable then pull out the coaxial connector.
2 Screws
LCD cable
Figure 5-11 Two Screws of LCD Panel Connector
PDF created with FinePrint pdfFactory trial version