FIC a985 Servicehandbuch

Seite von 14
 
Maintenance & Disassembly 
 
5-12 
FIC A985 Service Manual 
 
 
5.5.8     Removing the Internal Hard Disk Drive 
 
The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an 
industry standard 2.5” IDE disk drive with a maximum height of 9.5mm, and can be upgraded 
with another standard 2.5” HDD with a maximum height of 9.5mm. 
 
1.  Find out the built-in hard disk secured with two screws at the right corner of the hard disk. 
Remove that screw and carefully pull the hard disk module from the connector. 
 
 
2 Screws 
 
 
Figure 5-14  Remove Two Screws Securing HDD 
 
2.  Remove four screws of frame HDD bracket plate. Two small ones of them are at the front 
side, and others are at the both sides  
 
 
4 Screws 
 
 
Figure 5-15  Screws Locations of the frame HDD bracket plate 
PDF created with FinePrint pdfFactory trial version