Panasonic wv-cm146 Benutzerhandbuch
QUAD
SEQUENCE 1/5
2/6
3/7
4/8
SET UP
-6-
** SET UP MENU **
CAMERA ID 1.34..7.
1 CAMERA
AUDIO SELECT 1
TIMING SELECT EXT
----- ----
PAGE SEQ 2SEC
ALARM REC MODE FRAME
ALARM TIME ADJ 10SEC BZ
AUTO RESET OFF
BRIGHT COMP 12..5..8
END SET UP ENABLE
CAMERA ID 1.34..7.
1 CAMERA
AUDIO SELECT 1
TIMING SELECT EXT
----- ----
PAGE SEQ 2SEC
ALARM REC MODE FRAME
ALARM TIME ADJ 10SEC BZ
AUTO RESET OFF
BRIGHT COMP 12..5..8
END SET UP ENABLE
2. SETUP ORDER
When camera set up is required, proceed according to the
following steps.
following steps.
(1) Display the SET UP MENU by pressing QUAD/
SEQUENCE, SET UP switch more than 2 seconds.
(2) Edit CAMERA ID (Camera Identification Setting).
(3) Set AUDIO SELECT (Audio Selection).
(4) Set TIMING SELECT (Timing Selection).
(5) Set SEQ TIME ADJ (Sequential Time Adjustment).
(6) Set PAGE SEQ (Page Sequence).
(7) Set ALARM REC MODE (Alarm Recording Mode
(3) Set AUDIO SELECT (Audio Selection).
(4) Set TIMING SELECT (Timing Selection).
(5) Set SEQ TIME ADJ (Sequential Time Adjustment).
(6) Set PAGE SEQ (Page Sequence).
(7) Set ALARM REC MODE (Alarm Recording Mode
Setting).
(8) Set ALARM TIME ADJ (Alarm Time Adjustment/ Alarm
Sound On/Off Setting).
(9) Set AUTO RESET (Auto Reset On/Off Setting).
(10) Set BRIGHT COMP (Bright Compensation Setting).
3-2. Audio Selection (AUDIO SELECT)
** SET UP MENU **
CAMERA ID 1.34..7.
1 CAMERA..
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1SEC
PAGE SEQ ----
ALARM REC MODE FRAME
ALARM TIME ADJ 10SEC BZ
AUTO RESET OFF
BRIGHT COMP 12..5..8
END SET UP ENABLE
CAMERA ID 1.34..7.
1 CAMERA..
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1SEC
PAGE SEQ ----
ALARM REC MODE FRAME
ALARM TIME ADJ 10SEC BZ
AUTO RESET OFF
BRIGHT COMP 12..5..8
END SET UP ENABLE
1. SET UP MENU
Make sure that the connection of cameras, peripherals, or alarm connectors is correct and firm. The SET UP MENU is not displayed
if no camera is connected. (Refer to "CONNECTIONS" on page 15.)
This menu is described in the following section 3
if no camera is connected. (Refer to "CONNECTIONS" on page 15.)
This menu is described in the following section 3
"
SET UP MENU DESCRIPTION
"
in detail.
Set the DISPLAY MODE switch to ON to display SET UP MENU.
Set the INPUT SELECT switch to CAMERA to display the SET UP MENU. If you select VTR, the SET UP MENU is not displayed.
Set the INPUT SELECT switch to CAMERA to display the SET UP MENU. If you select VTR, the SET UP MENU is not displayed.
A set up operation can be performed with the following
switches on the front panel.
switches on the front panel.
Up Switch:
The cursor moves upwards.
Down Switch:
The cursor moves downwards.
Left Switch:
The cursor moves to the left.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
Right Switch:
The cursor moves to the right.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
Set up Switch:
The menu is selected by this switch.
Right Switch
Left Switch
Setup Switch
Down Switch
Up Switch
3. SET UP MENU DESCRIPTION
3-1. Camera Identification (CAMERA ID)
Up to 8 characters (alphanumeric) for camera identifi-
cation can be displayed on the top line of the picture.
cation can be displayed on the top line of the picture.
Display or no display of camera ID can be set on the
first line of this item, and displayed characters can be
edited on the second line.
first line of this item, and displayed characters can be
edited on the second line.
Note:
Refer to
"
SET UP OPERATION
"
for details.
Select the audio signal from SET UP MENU (SEQ, 1, 2,
3, or 4.)
3, or 4.)
SEQ:
The audio signal changes automatically when
the camera picture changes.
1-4:
The audio signal is fixed on the desired channel.
SETUP OPERATION
SET UP menu
Camera
ID
ON/OFF
Audio
Select
Timing
Select
Auto
Reset
Sequence
Time
Adjust
Alarm
Time
Adjust
SETUP DISABLE
→
SETUP ENABLE
→
Alarm
Recording
Mode
Bright
Compensation
ON/OFF
Page
Sequence