FIC a440 Servicehandbuch
Software Functional Overview
FIC A440 Series Service Manual
3-1
Chapter
3
3.1
3.1
3.1
3.1 Overview
Overview
Overview
Overview
The A440 is an IBM PC/AT compatible Notebook PC that supports the Socket 370 Intel
Mobile Pentium III or Celeron processor family. The following are the major features that
A440 supports:
Mobile Pentium III or Celeron processor family. The following are the major features that
A440 supports:
• Microsoft PC99 and ACPI logo approval
• Offer 800x600 SVGA display with 12.1” LCD panel
• Offer 1024x768 XGA display with 13.3”/14.1” LCD panel
• Support ACPI 1.0 (or above)
• Support PCI 2.1 (or above)
• Support AGP 2.0
• Support SMBIOS 2.1 (or above)
• Support 100MHz CPU front side bus
• Support a proprietary Port Replicator
3.2
3.2
3.2
3.2 Summary of the BIOS Specification
Summary of the BIOS Specification
Summary of the BIOS Specification
Summary of the BIOS Specification
Below is the summary of the BIOS software specification:
Controller Chip
Description
BIOS Feature
Boot Block / Crisis Rescue
APM 1.2 Compliance
Support PCI 2.1 (or above) Spec
Support Windows 95, Windows NT4.0, Windows 98, and
Windows 2000
Windows 2000
Support Flash function for new BIOS update
Support 3-Mode FDD
Support ACPI 1.0 (or above) Spec
Support SMBIOS 2.1 (or above) Spec
Support AGP 2.0
Support boot from FDD, HDD and CDROM Drive
Support maximum 4 different keyboards on same BIOS
CPU
Auto detect the CPU type and speed for the Socket 370 or Slot 1
based system
based system
DRAM
Auto sizing and detection
Support PC-100 SDRAM
Cache
Level 2 SRAM auto sizing and detection
Always enable CPU L1 and L2 cache
Shadow
Always enable VGA and System BIOS shadow
Display
System auto detects LCD or CRT presence on boot and lid
closed
closed
Support Panning while LCD in a display resolution greater
than supported
than supported
Support Microsoft Direct 3D