Gateway convertible notebook cx200 cx2000 m280 m285 s-7200 ta1 ta6 ta7 Servicehandbuch
Replacing convertible notebook components
66
Replacing the TPM module (select models)
Tools you need to complete this task:
v
Screws removed during this task:
To replace the TPM module:
1
Complete the steps in
2
3
Remove the two screws that secure the TPM module to the system board.
4
Lift the TPM module from the system board.
5
Install the new TPM module onto the system board.
6
Replace the TPM module screws removed in
.
7
Replace the wireless bay cover, then tighten the cover screw.
Important
If the TPM module is not located in the wireless bay, use the procedure found in
to replace the TPM module.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
2 black 2.0*2.5 (TPM
module)
module)
Screw
Screw