JVC dr-m10s Benutzerhandbuch

Filename [DR-M10SE_11Subsidiary.fm]

Masterpage:Left+

Page 108

February 13, 2004 4:07 pm

You can select the scan mode from two modes: Interlaced 
scan mode which is used in the conventional TV system, 
and Progressive scan mode which enables reproduction 
of higher-quality images. For details, refer to 
“GLOSSARY” (

A

Press PROGRESSIVE SCAN for 3 or more seconds.

● Video output indicator ( ) lights on the front display panel if 

Progressive scan mode has been established. (

● Each press of PROGRESSIVE SCAN for 3 or more seconds 

switches the scan mode.

● When the progressive mode is set, be sure to set “L-1 

OUTPUT” to “COMPONENT”. (

L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)”) Progressive 
scan is output only from COMPONENT VIDEO OUT 
connector.

● Interlaced scan mode is the setting at your purchase.

● When Progressive scan mode is engaged, no video signal is 

output from S-VIDEO OUT connector and L-1 IN/OUT 
connector.

● Interlaced scan mode might be suitable depending on video 

material.

● Scan mode cannot be set while menu screen is displayed.

You can lock the disc tray to prohibit the unwanted disc 
ejection  by children.

A

While the unit is turned off, press and hold 8, then press 
x on the unit. “LOCK” appears on the front display 
panel.

● If you try to eject the discs, “LOCK” appears and indicates that 

tray is locked.

To unlock tray
While the unit is turned off, press and hold 8, then press 
x on the unit. “UNLOCK” appears on the display panel.

● Turn on the unit.

● Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.

Your TV needs to be compatible with PAL Progressive.

● Turn off the unit.

DR-M10SE_11Subsidiary.fm  Page 108  Friday, February 13, 2004  4:07 PM