Eizo FlexScan L578 Benutzerhandbuch

Press the Power button to return to a normal screen.

  

●     

The off timer function works while the PowerManager is active, but there is no advance notice before 
the monitor's power is switched off.

When switching on the Power button on the control panel, the EIZO logo is displyed for a while. If you 
desire to display or undisplay this logo, use this function. (Default is logo appearing.)

Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the 
power back on.

Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the 
power back on.

The monitor will automatically detect the inputted signal of either the connection for display. (Default: this 
function is set ("Auto").)

  

●     

Connecting Two PCs to the Monitor
When the one computer is switched off or entering the power saving mode, the monitor will 
automatically display the other signal.

Use the ScreenManager to switch the input signal manually.

1.  Select <Input Signal> in the <Others> menu.

2.  Select <Manual>.