Eizo FlexScan L578 Benutzerhandbuch

Use the "Adjustment Lock" function to prevent any accidental changes.

 

Locked function

●     

Adjustments and settings in the ScreenManager

●     

Auto Adjustment Button 

●     

Mode Button

●     

BrightRegulator Button

Unlocked function

●     

Power Button

●     

Input Signal Selection Button

●     

Volume Control by Right/Left Control Button

●     

Brightness adjustment by Up/Down Control Button

1.  Turn off the monitor's power by the Power button on the control panel.

2.  Press on the Auto Adjustment button while turning on the monitor's power.

1.  Turn off the monitor's power by the Power button on the control panel.

2.  Hold down the Auto Adjustment button once again and turn the power back on.

The off timer function causes the monitor to automatically enter a power off state after a predetermined 
amount of time has lapsed. This function was created to reduce Afterimage characteristics that are 
particular to LCD monitors when the monitor screen is left on for a long period without use.

1.  Select <Off Timer> in the ScreenManager <Others> menu.

2.  Select "Enable" and press the Right and Left buttons to adjust the "On Period" (1 to 23 hours).

 

On Period (1H - 23H)

Operation

Blue

Last 15 min. in "On period"

 

 

Blue Flashing

"On period" expired

Power Off

Off

*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor 
automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the Power 
button during the advance notice period. The monitor will continue to operate for an additional 90 
minutes.