Siemens TC63 Benutzerhandbuch

Seite von 501
TC63 AT Command Set  
10.4 AT^SISC
s
TC63_ATC_V00.490
Page 260 of 501
5/24/05
Confidential / Draft - Do not copy
 
10.4.1 Effect of parameter <closeMode>
Once the last service has been closed the bearer shuts down after a timeout of 20 seconds (i.e. the connection
profile GPRS0 or CSD is closed). If a service related to the same connection profile starts up again whithin this
time frame, the bearer will not be closed, but started again. This speeds up the handling of several service
requests. Within this time frame it is neither possible to change the bearer type (from GPRS to CSD or vice versa)
nor to start a service based on a different connection profile. 
To disconnect the bearer before the timeout expires the command 
=0 can be used in the case of
GPRS and 
 in the case of CSD. 
Service type 
Graceful 
Immediate 
Socket 
TCP/IP connection will be closed after the 
transmission of remaining data has com-
pleted. 
TCP/IP connection is closed immediately. All 
remaining data are lost. 
FTP 
FTP upload:
The "OK" response following the command 
=
 indicates that the FTP service has 
accepted the close command - it DOES NOT 
indicate the successful completion of the FTP 
service close procedure. Successful comple-
tion will be indicated by the appropriate URC 
: x,2". The host application can force a 
service shutdown (
= 1) if the 
aforementioned URC doesn't occur after a 
user defined timeout. 
FTP download:
 immediate: TCP/IP 
connection is closed immediately. 
TCP/IP connection is closed immediately. All 
remaining data are lost. 
HTTP 
TCP/IP connection is closed immediately. 
TCP/IP connection is closed immediately. 
SMTP 
The SMTP service sends some "closing" 
commands which are necessary to mark the 
email as successfully sent on the server. The 
service enters the 
 "Closing" 
and remains in this state until the final protocol 
exchange with the SMTP server has com-
pleted. 
The "OK" response following the command 
=
 indicates that the SMTP service has 
accepted the close command - it DOES NOT 
indicate the successful completion of the 
SMTP service close procedure. Successful 
completion will be indicated by the appropri-
ate URC "
: x,2". The host application 
can force a service shutdown (
= 1) if the aforementioned URC doesn't 
occur after a user defined timeout. 
The SMTP service closes the TCP/IP connec-
tion immediately. Email transfer is aborted. 
This mode can be used to cancel an SMTP 
operation. 
POP3 
 immediate: TCP/IP 
connection is closed immediately. 
TCP/IP connection is closed immediately.