Pioneer AVIC-N1 Benutzerhandbuch

➲ About troubleshooting other than description 

below 

➞ Appendix of the Operation Manual

There’s no picture.

The parking brake cord is not connected.

Connect a parking brake cord, and apply the 
parking brake.

The parking brake is not applied.

Connect a parking brake cord, and apply the 
parking brake.

The icon 

 is dis-

played, and operation 
is not possible.

The operation is prohibited for the disc.

This operation is not possible.

The operation is not compatible with the 
disc’s organization.

This operation is not possible.

The picture stops 
(pauses) and the unit 
cannot be operated.

Reading of data has become impossible 
during playback.

After pressing 

7

7

7

7 once, start playback once 

more.

The picture is 
stretched, the aspect is 
incorrect.

The aspect setting is incorrect for the dis-
play.

Select the appropriate setting for your dis-
play. (Page 15)

Rear display picture 
disappears.

• The source disc being listened to with the 

product has been ejected.

• The REAR button was pressed and REAR 

ON mode switched off.

• There was a problem with the rear display 

or a faulty wiring connection, for example.

• Rear View is selected on the screen.
• When the shift lever is in [R], displays rear 

view camera images. (When “NAVI” is 
selected in REAR DISP menu.)

• Before ejecting the disc, switch the 

source. This problem may occur when cer-
tain connection methods are used.

• Press the REAR button to turn REAR ON 

mode on.

• Check the rear display and its connection.
• Select view mode other than Rear View.
• Move the shift lever other than turn [R] po-

sition. (Select SOURCE in REAR DISP 
menu.)

Nothing is displayed 
and the touch panel 
keys cannot use.

The setting for the rear view camera is in-
correct.
The shift lever was placed in [R] when the 
rear view camera was not connected.

Connect a rear view camera correctly.
Press NAVI/AV button to return to the 
source display and then select the correct 
setting for CAMERA.

➲ About CAMERA setting 

➞

 Operation 

Manual

LCD Panel knocking 
against your vehicle’s 
console or dashboard.

Incorrect setting of angle.

Press ANGLE (+/–) to adjust the LCD an-
gle. Forcibly adjusting the LCD panel by 
hand may damage it.

Video image appears 
grainy.

This happens when videos are viewed in 
CINEMA or ZOOM mode.

Select a different mode to view videos.